According to the body thickness, cost and other considerations, each of the models cooling components designed in different ways, some in the fuselage bottom shell aside to facilitate the maintenance of the small plate, you will need to tear down some or all of the bottom C shell shell. In fact, for the internal cooling components, too, although cooling fan laptop cooling assembly consists of two parts and fins, but the differences between the two fixation methods, as some are separated from each fixed, some are integrated design ...... this makes the dismantling of the cooling fan in different ways. To learn dismantling way, we have to talk about fixed way from the fan.
Independent fixed on the motherboard fan Fans Material: pure plastic
Such models are plastic fan (cooling fan impeller and wind shield composition), the fan will design four weeks 2 to 3 screw holes, screw the fan and motherboard via fixed together, while the fan wind shield directly at the outlet fins, fan and heat sink paste the seams sponge or tape, so that the fan blowing air flow can all be blown fins to improve cooling efficiency.
Dismantling way: If the fan and cooling fins at the seams with tape fixed (some precision workmanship models or cost-saving models no design), first tear tape and use a screwdriver or tweezers to disconnect the cooling fan and power supply connection, and then removed all the screws fixing the fan and lift the fan away from the cooling fins at one end, slowly upward force, the fan can easily be taken down.
Fan wheel fixed to the heat sink base Fans Material: Alloy casting plastic
Such models cooling components biggest feature is the use of compact design, the ultra-short heat pipe tightly around the fan around, in order to save space, heat sink base (brass and motherboard chipset cooling metal parts in contact) and the fan will wind shield directly solidified together, and the way the impeller fan just hanging in the heat over the base, and through a few screws. Dismantling method: the dismantling of the first class of models is similar, except for this fan screws in the base of the heat pipe, rather than wind shield around the border, tear down this a few screws and disconnect the fan power line, lift the fan impeller on it.