The paste extrusion a little on the main CPU, should not be too much or too little when fan pressure placed on the CPU, the fan pressure the paste extrusion able to cover the main CPU core as the standard.
Second, the CPU fan side of the cleat first withhold SOCKET side.
Note: CPU fan cleat direction, the correct installation direction to hold back the CPU socket no prominent side.
Then install another cleat to the CPU Socket on fixed hook, basically fan design will be easy to install, taking into consideration, therefore, after the buckle side of the cleat usually allows installers the location of the force, to facilitate installation.
When the installation is complete, you must check whether the CPU fan is closely connected with the CPU, there is no gap between the CPU and fan.
Installation sequence or in the wrong direction, the CPU and CPU fan exact adhesion, the CPU fan is not really in contact with the CPU core body, can not achieve the cooling effect, easy to cause the CPU to overheat and crash. It is necessary to remove the fan reload, remove, please pay special attention to, the improper force the CPU body crushed, resulting in damage to CPU can not work properly.
Finally install the CPU fan power cord Note: Do not let the the wire wrapped CPU fan blades, and the fan is not running, the fan out of action.
7, another possible case of installation errors: the direction and order are correct, but no fan is aligned with the CPU, resulting in one side of the fan pressure causes the fan is not in close contact with the CPU in the socket above, this installation also makes cooling effect of discount should be avoided. Should ensure that the top of the fan to the CPU installed in the same way as with the fourth point.